Dayton Wheel Conversion - m1

Idk that tires will be.

If you don't mind keeping the dayton wheels it's cheap and easy to go to 11r or low pro 22. 5.

Those have an inner wheel a spacer ring and an outer wheel.

This same conversion works for 15″ tubetype going to 17. 5″ tubeless & 22″ tubetype going to 24. 5″ tubeless.

I can't seem to locate a suitable wheel based on a modern conversion.

If i'm understanding what you want to do correctly you can just take the inside tire off the wheel.

11r22. 5 is direct replacement for 10. 00r20.

You need 8. 25x22. 5 wheel for 11r22. 5.

After researching the possible issues with the dayton style wheels, i have decided that for my peace of mind, i will change out the hubs, wheels and brakes (brakes only on one.

I acquired a '87 ford l8000 that is in really nice shape except that i hate the looks and.

Hello gents, i have a 92 ih bus with 22. 5 dayton wheels.

I'm looking to replace both the drives & steering.

Apparently you can use this center section on.

Tubetype 20″ dayton wheels can be replaced by 22. 5 tubeless dayton wheels without changing any of the mounting hardware & using the same hub.

This same conversion works for 15″.

10x20 tires still available here but i just changed to tubeless.

Tubetype 20″ dayton wheels can be replaced by 22. 5 tubeless dayton wheels without changing any of the mounting hardware & using the same hub.

No one has the adapters to mount the tire on a spin balancer.

You can upgrade your tire/rim combo to a 22. 5 single piece rim very easily.

Does anyone know what the options are for converting the hubs on a older chevy medium duty to modern 22. 5 wheels?

My question is, how much trouble and at what cost am i looking at to change them over to budds.

I have bought a 1984 b60 chevy bus that has dayton style wheels on it with 9. 00 20's and want to swap to 10 r22. 5 tires since the 20's are unobtainum anymore.

I'd like to switch to a 22. 5 setup when it comes time to get tires.

Do you have an old trailer with dayton style (mobile home) hubs?

📸 Image Gallery

If you took the.

There is alot more to converting hubs than just the bearings.

Balancing a dayton rim is impossible around the kansas city area using a spin balancing machine.

What do i need to make this work?

After 10 years, i decided to upgrade.

I just picked up a set of 8. 25x22. 5 rims and will be mounting 11rx22. 5's.

Dayton wheel to 10 lug conversion.

You can still get new dayton rims in the 22. 5 size for about 150 a piece, or you can find set of used.

I was blowing tires out every time i used this trailer!

Hey all, i am new to this forum but am a diesel mechanic by trade and a driver by choice.

I have a 1986 international s1600 with 9x20's right now.

You have a gunite hub look here and you will find a conversion request from gunite at the bottom of the page.

Buy a bus with budd wheels and air brakes, and swap in your stick shift if you like.

I have looked at the offerings by accuride but the recommended.